10" x 36" CINCINNATI-MILACRON #430ECIII
30-DEGREE ANGULAR PLUNGE GRINDER
New 1980, Serial No 35432D379-0006, Model 430ECIII,

EQUIPPED WITH:
Acramatic #ECIII Control
Auto Balance
3 HP VS Headstock Drive Combination Live/Dead Center

CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum........................... 10.9375"
Grinding Diameter, Maximum........................... 10"
Distance Between Centers, Nominal................. 36"
Work Length Capacity, Maximum.................... 40"
Grinding Wheel Diameter, Standard.................. 36"
Grinding Wheel Width, Standard...................... 6"
Grinding Wheel Hole Diameter......................... 12"
Table Swivel Taper........................................... 3.79" TPF
Table Swivel Angle, Clockwise......................... 9-DEGREES
Table Swivel Angle, Counterclockwise.............. 3-DEGREES
Grinding Wheel Speed...................................... 830 RPM
Headstock Speeds, Range................................ 34 to 245 RPM
Infeed Rapid Approach, Side Movement........... 4"
Infeed Stock Removal Amounts, Range............. 0 to 10"
Grinding Wheelhead Spindle Motor................... 25 HP
Electrical System............................................... 220-440/3/60
Weight, Approximately...................................... 21900 LBS

CONDITION: Appears to be in Very Good Condition.

PRICE: F.O.B. OUR WAREHOUSE......... $5000.00