6" x 18" CINCINNATI-MILACRON #410ECIII
30 DEGREE ANGULAR PLUNGE GRINDER
New 1980, Serial No 35411A379-0004, Model 410ECIII,

EQUIPPED WITH:
Acramatic ECIII Control
Marposs Gage - Auto Balance
2-1/4 HP VS Headstock - Auto Footstock

CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum...................... 6"
Grinding Diameter, Maximum...................... 6"
Distance Between Centers, Nominal............ 24"
Work Length Capacity, Maximum............... 20"
Grinding Wheel Diameter............................ 24"
Grinding Wheel Width................................. 4"
Grinding Wheel Hole Diameter................... 12"
Table Swivel Taper..................................... 4.67" TPF
Table Swivel Angle Clockwise.................... 11-DEGREES
Table Swivel Angle Counterclockwise......... 3-DEGREES
Grinding Wheel Speed................................ 1300 RPM
Headstock Speeds, Range........................... 50 to 630 RPM
Infeed Rapid Approach, Side Movement...... 4"
Infeed Stock Removal Amounts, Range....... 0 to 10"
Grinding Wheelhead Spindle Motor............. 15 HP
Electrical System.......................................... 220-440/3/60
Weight, Approximately................................ 16600 LBS

CONDITION: Appears to be in Very Good Condition.

PRICE: F.O.B. OUR WAREHOUSE...... $9,950.00